ONN 4K Pro: Initial Setup & Configuration

Device: ONN 4K Pro

Task: Set up an ONN 4K Pro for use with the Budvue digital signage app for the first time.

Use this article when: You are setting up a new ONN 4K Pro, or reinstalling Budvue on an ONN 4K Pro after a factory reset.

Do not use this article if: You have a BuzzTV or DS1 device — see BuzzTV / DS1: Hardware Connection & Initial Setup instead.

What You'll Need

• ONN 4K Pro HDMI cord (included with ONN 4K Pro)
• TV with an available HDMI port
• Power adapter and cable (included with ONN 4K Pro)
• Wi-Fi network name and password
• Access code for this screen (found in Budvue Dashboard → Devices tab)

Steps

Step 1: Connect the ONN 4K Pro to Your TV

1. Plug the ONN 4K Pro into an HDMI port on the back or side of your TV using the included HDMI cable.
2. Plug the power adapter into a wall outlet.
3. Switch your TV's input to the HDMI port the ONN 4K Pro is plugged into — the setup screen will appear.

Step 2: Connect to Wi-Fi

Step 3: Download the Budvue App

1. From the home screen, navigate to the top menu and select Apps.
2. Search for "Budvue".
3. Select the app from the search results and tap Install.
4. Once the installation is finished, open the app.

Step 4: Enter Your Access Code

1. Click Next or Arrow through the first two steps of the setup (adjusting the screen size, as well as the orientation).
2. When prompted, enter the unique 5-digit access code for this screen.
   • Access codes are found by logging into the Budvue Dashboard and navigating to the TV → Devices tab.
   • Each code is single-use only. Generate a new one from the Dashboard if needed.

Resolution

If the Budvue menu is displaying correctly on your TV, the initial hardware and software setup is complete.

Contact Support

If you get stuck at any step — including the 5-digit access code screen — email tvsupport@budvue.com with:

• Store name and location
• Which screen/menu you are setting up
• A description or photo of what you are seeing on the TV screen